Heat My Home 160W/m² Underfloor Heating Mat - 7.0m².

Heat My Home heating mats are an efficient heat source and are easy to install. The heating mat is suitable for installation under all types of flooring. The cable for the heating mat is designed to provide a thermal output of 160W/m². Whatever the choice of heating mat, the heat supply and output are controlled by the thermostat. It is possible to connect several heating mats to the same thermostat. However, the total wattage on one thermostat may not exceed 3600W, but that will be enough to cover almost any size of room. The electrician can make a minor adjustment in the rare cases where more power is required, e.g. for very large rooms. The heating mat must not be laid right up to the wall, so you only need to calculate around 90% of the total area of floor to be covered by the heating mat. Heating mats cannot be installed under fixed installations on the floor, so if there are any of these in your room, you must subtract this area from the room size. It is important to ensure that the heating mat is not larger than the room because you cannot cut the cable to shorten it. You can only cut into the web between the cables to twist and turn the heating mat when rolling it from wall to wall.

Application and use.

Designed for use beneath tiles on a variety of floor bases including secured wooden floors, well insulated concrete sub-floors or Thermal Insulation Board. These mats are also suitable for use beneath wooden, vinyl and carpet floor finishes if they are first covered by 12mm of flexible levelling compound. 160W/m² heating mats can provide primary heating in most well insulated rooms, especially if they are laid onto insulation board.